Martin Thrill Multi FX – 5 x 3W RGBWA Led Efekt Işık
- Energizing multi-effect light featuring multibeam, laser, strobe
- Vibrant 5 x 3 W RGBWA rotating multibeam effects
- Blinding 8 x 1 W white LEDs for strobe effects
- Projects hundreds of razor sharp laser beams with green and red lasers
- Easy to operate standalone sound-activated, master/slave control methods
- 8 professionally pre-programmed shows
- DMX operable for individualized control and design
- Included adjustable bracket for hanging or surface mount
- Common IEC mains inlet/thru – mains cable included
PHYSICALLength: 246 mm (9.7 in.)Length with hanging bracket: 307 mm (12.1 in.)Width: 234 mm (9.3 in.)Width with hanging bracket: 234 mm (9.3 in.)Height: 246 mm (9.7 in.)Height with hanging bracket: 286 mm (11.3 in.)Weight: 4.5 kg (9.8 lbs.)
DYNAMIC EFFECTSMultibeam effectsColor mixing: RGBWAColor selection: 36 color presetsElectronic dimming: 0-100%Strobe rate: 0-22 HzStrobe and pulse effects: Variable speed and action, random strobeElectronic ‘shutter’ effect: Instant open and blackoutStrobe effectsColor: WhiteStrobe rate: Fixed, 15 HzSpecial effects: On/off, strobe effect, pulse effects, random and blackoutLaser effectsColor: Red, greenSpecial effects: On/off, strobe effect, pulse effects, random and blackout
CONTROL AND PROGRAMMINGControl options: DMX, stand-aloneSafety lockout switch, laser: Keyed switch on/off operationDMX channels: 2/16Stand-alone trigger options: Sound-trigger, auto-runUser interface: Control panel with LED displayDMX compliance: ANSI E1.11 – USITT DMX512-A
OPTICSMultibeam and strobeMultibeam light source: 5 x 3 W RGBWA LEDsStrobe light source: 8 x 1 W White LEDsMinimum LED lifetime: 30 000 hours (to >70% luminous output)**Figure obtained under manufacturer’s test conditionsLaserGreen laser, power / wavelength: 3.8 mW / 531 nmRed laser, power / wavelength: 1.5 mW / 659 nmAperture diameter: 7 mmBeam shape: DivergentPulse duration (frequency): Not pulsedClass: 3R (US: Class IIIR)Minimum laser lifetime: 3 000 hours**Figure obtained under manufacturer’s test conditions
CONSTRUCTIONHousing: SteelColor: BlackIngress protection: IP 20
INSTALLATIONMounting: Adjustable bracket, surface or truss mountMounting points: Bracket for single rigging clamp, M12 or ½”Orientation: Any (respecting laser precautions)Location: Indoor, dry locations only, overhead use onlyMinimum distance above floor level: 3 m (9.8 ft.)Minimum distance from public: 3 m (9.8 ft.)
CONNECTIONSAC power in/thru: IEC male inlet/female connector, C14/C13DMX data in/thru: 3-pin XLR
ELECTRICALAC power: 100-240 V nominal, 50/60 HzFuse: F 3 AL, 250 VTypical power consumption:: 35 W*Maximum number of fixtures on AC power throughput, 100-130 V: 6 x THRILL Multi-FX LED or 3 AMaximum number of fixtures on AC power throughput, 220-240 V: 10 x THRILL Multi-FX LED or 3 A*Power consumption figures are typical, not maximum. Allow for +/-10% variation.
TYPICAL POWER AND CURRENT110 V, 60 Hz: 0.5 A, 35 W *230 V, 50 Hz: 0.3 A, 35 W **Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
THERMALCooling: PassiveMaximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%) at full intensity, full white: 225 BTU/hr.
Henüz değerlendirme yapılmadı.