Martin Thrill Compact Par Mini – 7 x 3W RGB Led Par
- Uniform field of light via 7 x 3 W RGB LEDs
- Fixed 25° beam angle
- 36 vibrant pre-programmed colors
- Dynamic effects include color mixing, strobe, dimmer
- Remote control included for quick color selection
- Easy to operate standalone sound-activated, master/slave control methods
- 4 professionally pre-programmed shows
- DMX operable for individualized control and design
- Included multi-function bracket for hanging or surface mount
- Common IEC mains inlet/thru – mains cable included
PHYSICALLength: 229 mm (9 in.)Width: 115 mm (4.5 in.)Height: 229 mm (9 in.)Weight: 1.3 kg (2.9 lb.)Maximum standing footprint: 229 mm (9 in.) x 204 mm (8 in.)
DYNAMIC EFFECTSElectronic shutter effect: Instant open and blackoutElectronic dimming: 0 – 100 %Strobe and pulse effects: Variable speed and action, random strobeColor mixing: RGBColor selection: 36 color presets
CONTROL AND PROGRAMMINGControl options: DMX, stand-alone, IR remote controlUser interface: Control panel with LED displayDMX channels: 3/6Standalone trigger options: Sound-trigger, auto-runDMX compliance: ANSI E1.11 – USITT DMX512-A
OPTICSLight source: 7 x 3 W RGB LEDsBeam angle: 25°Minimum LED lifetime: 30,000 hours (to >70% luminous output)**Figure obtained under manufacturer’s test conditions.
CONSTRUCTIONHousing: High-impact flame-retardant thermoplasticColor: BlackIngress protection: IP 20
INSTALLATIONMounting: Adjustable bracket, surface or truss mountMounting points: Bracket for single rigging clamp, M12 or ½”Location: Indoor use onlyOrientation: Any
CONNECTIONSAC power in, thru: IEC male inlet/female connector, C14/C13DMX data in, thru: 3-pin XLR
ELECTRICALAC power: 100-240 V nominal, 50/60 HzFuse: F 3AL, 250 VTypical total power consumption: 25 WMaximum fixtures on AC power throughput, 100-130 V: 10 THRILL Compact PAR Mini LED or 3 AMaximum fixtures on AC power throughput, 220-240 V: 15 THRILL Compact PAR Mini LED or 3 APower consumption figures are typical, not maximum. Allow for +/-10% variation.
TYPICAL POWER AND CURRENT110 V, 60 Hz: 0.3 A, 30 W *230 V, 50 Hz: 0.2 A, 30 W **Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
THERMALCooling: PassiveMaximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%): 85 BTU/hr. (at full intensity, full white)
APPROVALSEU safety: EN 60598-1, EN 60598-2-17, EN 62471, EN 62493EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547US EMC: CFR Title 47 Part 15 Class A (pending)Canadian EMC: ICES-003 Class A (pending)Australia/NZ: RCM (pending)