Martin Thrill Vertical Fogger – 21 x 3W Led Efektli 7 Metre Püskürtme Mesafeli Sis Makinası
- Fog effects at most any angle including upside-down
- 1,400 W heat exchanger produces 480 m³ (17,000 ft³) per min. fog output
- Rapid 8-minute ready time
- 2.5 l fluid reservoir for less frequent fill-ups
- Create ambience with 21 x 3 W single LEDs (7 each R, G, B)
- 36 vibrant pre-programmed colors
- Wireless 4-channel remote control included for fast and easy operation
- DMX operable for individualized control and design
- Included adjustable bracket for mounting
- Common IEC mains inlet – mains cable included by region
Specifications
-
Physical Length: 455 mm (17.9 in.) Width: 311 mm (12.5 in.) Height: 199 mm (7.8 in.) Height with hanging bracket: 351 mm (13.8 in.) Weight, dry: 9.5 kg (20.9 lb.) Weight, filled: 12 kg (26.5 lb.)Performance Coverage volume: 480 m3 (17,000 ft3) per minute Maximum fluid consumption: 60 ml per minute Maximum operating time at full output: 30 seconds Ready time: 8 minutesDynamic Effects Electronic shutter effect: Instant open and blackout Electronic dimming: 0 – 100% Strobe and pulse effects: Variable speed and action, random strobe Color mixing: RGB Color selection: 36 color presets Fog : On/OffControl and Programming Control options: DMX, 4-channel wireless remote control, pushbutton on/off Control parameters with wireless remote: On/off operation Control parameters with DMX: Full-featured User interface: Control panel with LED display DMX channels: 7 DMX compliance: ANSI E1.11 – USITT DMX512-AOptics Light source: 21 x 3 W LEDs (7 each R, G, B) Minimum LED lifetime: 30,000 hours (to >70% luminous output)* *Figure obtained under manufacturer’s test conditionsConstruction Housing: Steel Color: Black Heat exchanger: 1400 W, thermally protected Fluid pump: Oscillating piston, high pressure Fluid management: Fluid out sensing, sight glass Fluid reservoir: 2.5 liter, removable Hanging bracket: Integrated adjustable yoke Safety attachment points: 2-threaded inserts, front/side (M8 eye-bolt included) Wireless remote control unit (included): 4-channel, 30 m (100 ft.) rangeInstallation Mounting: Standing or hanging Mounting points: Bracket for single/double rigging clamp, M12 or ½” Orientation: Up to +/- 45° from horizontal Clearance around machine: 600 mm (24 in.)
-
Connections AC Power: IEC male inlet, C14 DMX : 3- and 5-pin locking XLR Wireless remote receiver: DIN 41524, 5-pin, 45°, 180° inletElectrical EU Model:
AC power: 220-240 V nominal, 50/60 Hz
Main fuse: F 8 AL, 250 V
Typical power and current at 220 V: 1280 W, 5.8 A*
Typical power and current at 240 V: 1520 W, 6.3 A*US Model:
AC power: 100-120 V nominal, 50/60 Hz
Main fuse: F 15 AL, 250 V
Typical power and current at 100 V: 980 W, 9.8 A*
Typical power and current at 120 V: 1400 W, 11.6 A**Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Exterior surface temperature, steady state: 50° C (122° F) Maximum nozzle temperature: 300° C (572° F)
Değerlendirmeler
Henüz değerlendirme yapılmadı.