Martin Rush Par 3 – RGB Led Par

Physical Length: 250 mm (9.4 in.) Width: 265 mm (10.6 in.) Height: 165 mm (6.5 in.) Weight: 3.4 kg (7.5 lbs.)

Dynamic Effects Dimming: 0 – 100%, coarse & fine control Shutter: Strobe & pulse effects, instant open and blackout Color : 8 bit RGB color mix

Control and Programming Control systems: USITT DMX512/1990 with RDM DMX channels: 9 RDM compliance: ANSI/ESTA E.120 Interface: Control panel with backlit LCD display

Optics Beam angle: 83° (without lens), 14.5° (with lens) Field angle: 106° (without lens), 33° (with lens)

Photometric Data

560 lumen without lens
380 lumen with lens

Construction Housing: Cast aluminum Color: Black or white version Protection rating: IP20

Installation Mounting points: Adjustable bracket, surface or truss mount Location: Indoor location only Orientation: Any Minimum distance to combustible materials: 0.1 m (4 in.) Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections AC power input/output: Neutrik PowerCon DMX/RDM in/out: 5-pin locking XLR

Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Typical half-cycle RMS inrush current: 7.8 A Recommended Miniature Circuit Breaker when power linking: Type D* *Per IEC 60898/UL489/CSA C22.2 No. 5 Maximum total power consumption: 30 W

Typical Power and Current 100 V, 60 Hz: 30 W, 0.5 A, PF 0.615 120 V, 60 Hz: 30 W, 0.4 A, PF 0.599 230 V, 50 Hz: 30 W, 0.3 A, PF 0.496 Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.

Thermal Cooling: Forced air, temperature-regulated Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)