Martin Rush Par 2 – 12 x 10W RGBW Led Par

Physical Length: 266 mm (10.5 in.) Width: 287 mm (11.3 in.) Height: 329 mm (13.0 in.) Weight: 5.5 kg (12.1 lbs.)

Dynamic Effects Electronic shutter effect: Instant open and blackout Electronic dimming: 0 – 100% Strobe and pulse effects: Variable speed and action, random strobe Color mixing: RGBW Color selection: 33 color presets plus full white, ‘color wheel’ effects Zoom: Motorized

Control and Programming Control options: DMX, standalone scene White balance control: RGB adjustment DMX channels: 5/9 Standalone programming: Control panel with LCD display DMX address setting: Control panel with LCD display Protocol: USITT DMX512/1990

Optics Zoom range: 10° – 60° Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* *Figure obtained under manufacturer´s test conditions.

Construction Housing: Aluminum Color: Black Protection rating: IP20

Installation Mounting: Adjustable bracket, surface or truss mount Location: Indoor use only Orientation: Any

Connections AC power in, thru: Neutrik PowerCon DMX data in/out: 5-pin XLR

Electrical AC power: 100-240 V nominal, 50/60 Hz Typical total power consumption: 151 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current 120 V, 60 Hz: 1.3 A, 151 W, PF 0.993 230 V, 50 Hz: 0.7 A, 148 W, PF 0.961 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 520 BTU/hr. (at full intensity, full white)