Martin Rush MH 7 Hybrid – 3 in 1 Beam Moving Head

Physical Length: 301 mm (11.9 in.) Width: 408 mm (16.1 in.) Height: 644 mm (25.4 in.) Weight: 24 kg (52.9 lbs.)

Dynamic Effects Color wheel: 13 colors incl. CTO, CTB, UV and open Rotating gobo wheel: 8 gobos plus open, 16-bit indexing, rotation and shake Static gobo wheel: 12 gobos plus open, wheel rotation and shake Zoom: Motorized, 16-bit coarse and fine control Focus: Motorized, 16-bit coarse and fine control Prism 1: 4-facet linear, 16-bit indexing, variable rotation direction and speed Prism 2: 8-facet radial, 16-bit indexing, variable rotation direction and speed Pan: 540° Tilt: 250° Dimming: 0-100%, coarse and fine control Shutter: Strobe effect, pulse effects, instant open and blackout

Control and Programming Control systems: DMX Setting and addressing: Control panel with backlit LCD display DMX channels: 21 DMX compliance: USITT DMX512/1990

Optics Cutoff angle, Beam Mode: 2.2° – 24° Cutoff angle, Spot Mode: 2.5° – 24° One-tenth peak angle, Wash Mode: 15° – 45°

Lamp Color temperature : 7800 K Average lifetime: 2000 hours* Approved lamp: Philips MSD Platinum 11R 250 W *Under manufacturer’s test conditions.

Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20

Gobos Interchangeable rotating gobos:

Permitted material: Stainless steel or borosilicate glass with 450° C high temp. coating
Diameter: 14 mm +0/-0.2 mm (0.55 in. +0/-0.008 in.)
Max. image diameter, glass: 8 mm (0.31 in.)
Max. image diameter, metal: 9.5 mm (0.37 in.)
Thickness, glass: 1.1 mm +0/-0.05 mm (0.045 in. +0/-0.002 in.)
Thickness, metal: 0.2 mm (0.008 in) nominal

Installation Minimum clearance around fan and air vents: 50 cm (20 in.) Mounting points: Two quarter-turn brackets for rigging clamps Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 20 cm (8 in.) Minimum distance to illuminated surfaces: 10 m (33 ft.)

Connections AC Power, EU: 100-240 V nominal, 50/60 Hz AC power in, thru: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR

Electrical Power supply unit: Auto-ranging electronic switch mode Primary fuse: 5T, 250 V, 8.0 A

Typical Power and Current 120 V, 60 Hz: 377 W, 3.1 A, PF 0.985 230 V, 50 Hz: 372 W, 1.7 A, PF 0.978 Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 1430 BTU/hr. (at full intensity, full white)