Martin JEM Hazer Pro – 650W Sis Makinası
- Continuous effect output
- Water-based fluid provides dense particles and even haze
- Sealed fluid system with quick-connect fittings
- 2.5 l fluid reservoir – 10.5hours on full output
- User-friendly on-board digital control panel
- Pre-programmed ‘silent’ mode
- Independent variable haze and fan control
- DMX Control with RDM
- Road-worthy industrial design
- Lightweight and small footprint
- Optional Flying Kit and Digital Remote Control
- Battery powered automatic shutdown system – prevents clogging
Specifications
-
Physical Length: 565 mm (22.3 in.) Width: 271 mm (10.7 in.) Height: 298 mm (11.8 in.) Height with rigging kit: 294 mm (11.6 in.) Weight, dry: 15 kg (33.1 lbs.) Weight, filled: 17.5 kg (38.6 lbs.)Performance Coverage volume:
5500 m3 (194,231 ft3) per hour
Operating time with 2.5 l fluid (minimum/maximum): 10.5/65 hours Operating time: Continuous Ready time: 6-minutes Ambient noise: Silent mode
Control and Programming Control options: Digital control panel, programmable fast access keys, DMX, optional digital remote control, master/slave link mode Control parameters: Continuous or timer-controlled output Haze and fan: Independent variable output, 0-100% DMX channels: 3 (Haze, Fan, Control) Self-cleaning cycle: Battery powered automatic shutdown, manually engaged, or DMX trigger DMX compliance: ANSI E1.11 – USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 RDMConstruction Housing: Steel and aluminum Color: Black Heat exchanger: 600 W trackless heat exchanger, thermally protected Blower fan: Integrated, 200-2500 RPM Fluid pump: Oscillating piston, high pressure Fluid management: Fluid out sensing, sealed for transportation Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fittingInstallation Mounting: Standing or optional flying kit Orientation: Up to +/- 30° from horizontal Clearance around machine: 100 mm (4.0 in.)Connections DMX, link mode in/out: 3- and 5-pin locking XLR Remote control: 3-pin locking XLR Firmware: AVR socket -
Electrical EU Model:
AC power: 220-240 V, 50/60 Hz
Main fuse: 6.3 AT (slow blow), 250 V
Typical power and current: 675 W, 3.1 A*US Model:
AC power: 100-130 V, 50/60 Hz
Main fuse: 10 AT (slow blow), 125 V
Typical power and current: 675 W, 6 A*AC power: Neutrik powerCon *Measurements made at nominal voltage. Allow for a deviation of +/- 10%
Thermal Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Exterior surface temperature, steady state: 30° C (86° F) Maximum nozzle temperature: 290° C (554° F)
Değerlendirmeler
Henüz değerlendirme yapılmadı.