JBL CSS 15C VA – 5” 6W 100V Tavan Hoparlörü

Stok kodu: 98273462 Kategoriler: KABİNLER, 100V HOPARLÖRLER

JBL CSS 15C VA – 5” 6W 100V Tavan Hoparlörü

Frequency Range (-10 dB)	180 Hz – 20 kHz
Power Capacity	6 Watts (at 6W tap)
Rated Pink Noise Power	6 Watts (at 6W tap)
Rated Pink Noise Voltage	100V distributed speaker line voltage
Nominal Sensitivity	92 dB (6W tap, ave 300 Hz – 15 kHz)
EN54 Sensitivity (@4 m)	80 dB (at 4m, 6W tap, per EN54-24 spectrum and measurement conditions)
Coverage Pattern	120° conical (2 kHz)
Coverage Angles(by Frequency) Conical (Vertical & Horizontal)	4000 Hz: 100° 2000 Hz: 120° 1000 Hz: 180° 500 Hz: 180°
Reference Axis for Specifications	The reference axis for specifications is directly on-axis vertically and horizontally, directly below the speaker as speaker is installed in the horizontal ceiling plane.
Rated Maximum SPL	100 dB @ 1m (3.3 ft) average SPL (6W tap @ 100V)
EN54 Max SPL (@4m)	88 dB (at 4m, 6W tap, per EN54-24 spectrum and measurement conditions)
Nominal Impedance	6W @ 100V tap: 1667 Ω3W @ 100V tap: 3333 Ω1.5W @ 100V tap: 6667 Ω
Transformer Taps	6W, 3W, 1.5W at 100V. Selected by sliding the included fast-on connector onto the proper tab on the transformer.
Fuse	Thermal fuse, open temperature 150 degrees C; 2A@250VAC; UL, CUL, VDE, PSE and CCC approved.
Driver	127 mm (5 in) dual-cone driver, paper cone
Connections	Input +, Input -, Earth Ground (connected to metal speaker baffle). Ceramic block with brass inserts (3.2 mm / 0.12 in. opening) accommodates 2.5 sq mm / 12 AWC wire.
Safety Agency	EN54-24 certified (Certificate No. 1488-CPR-0524/W), Compliant with BS5839/8; IP-21 per IEC529/60529; ROHS, CE compliant. In accordance with IEC60849/EN60849 systems.
Ambient Temp Range	-10°C to +55°C
Installation	Fire dome installation via two metal clamps, affixed via hex head clamp screws from inside of fire dome. Speaker installation via two torsion springs into hooks on inside of fire dome. See installation instructions.
Wire Entrance	Two diaphragm-type sealed-grommet entrance points on backcan in 20 mm (0.82 in) diameter cutouts that can be field fitted with installersupplied 19 mm (3/4-inch) mount gland nut for additional seal or strain relief.
Materials	Metal fire dome, metal speaker baffle, metal grille.
Dimensions	162 mm (6.4 in) fire dome diameter (outside of clamps);183 mm (7.2 in) speaker baffle diameter;116 mm (4.6 in) depth from bottom of ceiling surface to back of fire dome;129 mm (5.1 in) total depth.
Ceiling Cutout Size	165 mm (6.5 in) diameter hole ±2 mm (0.1 in).
Ceiling Thickness Range	0.5 mm (0.02 in) to 23 mm (0.9 in) ceiling thickness
Net Weight	1.5 Kg (3.3 lb) per speaker
Shipping Weight	1.9 Kg (4.2 lb) per speaker