JBL CSS H30 – 30W Horn Tipi Hoparlör

Stok kodu: D3D165CF Kategoriler: KABİNLER, 100V HOPARLÖRLER

JBL CSS H30 – 30W Horn Tipi Hoparlör

Frequency Response (-10 dB)	380 Hz – 6 kHz
Coverage Pattern	50° horizontal by 70° vertical (at 2 kHz and averaged 1 kHz – 4 kHz)
Included High-Pass Filter	Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.
Directivity Factor (Q)	15.8 (2 kHz)
Directivity Index (DI)	12 (2 kHz)
System Power Rating	30 W (120 W peak), 100 hrs.
Sensitivity (1W, 2.83V@ 1m)	108 dB, ave. 1 kHz – 6 kHz112 dB at 1.4 kHz
Maximum SPL (1m)	123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz; 127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input, 8 ohm Setting
Nominal Impedance	30W/70V, NC/100V tap: 167 ohms 15W/70V, 30W/100V tap: 333 ohms 7.5W/70V, 15W/100V tap: 667 ohms 3.8W/70V, 7.5W/100V tap: 1333 ohms 1.9W/70V, 3.8W/100V tap: 2666 ohms 8 ohms at 8 ohm direct setting
Transformer Taps	70V: 30W, 15W, 7.5W, 3.8W, 1.9W100V: 30 W, 15W, 7.5W, 3.8W
Driver	38 mm (1.5 in) diameter with phenolic diaphragm
Horn Material	ABS
Mounting Hardware	Stainless steel powder-coated U-bracket (yolk) with 3 x 10.4 mm (0.41 in) dia mounting holes, stainless steel exterior hardware.
Color	RAL9016 (horn and bracket)
Input Connection	300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-).
Environmental	IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware.
Safety Agency	Transformer UL Registered per UL1876 “Isolating Signal and Feedback Transformers for Use in Electronic Equipment”
Dimensions (H x W x D)	206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in) horn 224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in) including mounting bracket. Depth excludes cable exit.
Weight (ea)	4.5 lb/2.0 kg
Shipping Weight (ea)	6.0 lb/2.7 kg
Included Accessories	Stainless steel mounting bracket