Martin Rush Par 1 – 7 x 10W RGBW Led Par
- Bright LED PAR Can
- Premixed RGBW color mixing
- 17° one-tenth peak angle
- Electronic dimming and strobe
- Flexible bracket – floor or truss-mounted
- 5-pin XLR
Specifications
-
Physical Length: 260 mm (10.3 in.) Width: 195 mm (7.7 in.) Height: 293 mm (11.6 in.) Weight: 3.6 kg (8.0 lbs.)Dynamic Effects Electronic shutter effect: Instant open and blackout Electronic dimming: 0 – 100% Strobe and pulse effects: Variable speed and action, random strobe Color mixing: RGBW Color selection: 32 color presetsControl and Programming Control options: DMX, stand-alone White balance control: RGB adjustment DMX channels: 5/7 Standalone programming: Control panel with LED display Standalone trigger options: Music trig, auto trig DMX address setting: Control panel with LED display Protocol: USITT DMX512/1990Optics Light source: 7 x 10 W RGBW Cree MC-E LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* *Figure obtained under manufacturer’s test conditions.Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20Installation Mounting: Adjustable bracket, surface or truss mount Location: Indoor use only Orientation: AnyConnections AC power in, thru: Neutrik PowerCon DMX data in, thru: 5-pin XLR
-
Electrical AC power: 100-240 V nominal, 50/60 Hz Typical total power consumption: 78 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.Typical Power and Current 110 V, 60 Hz: 1.1 A, 78 W 230 V, 50 Hz: 0.7 A, 78 W Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 270 BTU/hr. (at full intensity, full white)
Değerlendirmeler
Henüz değerlendirme yapılmadı.