Martin Rush MH 10 Beam FX – Moving Head Beam Robot
- Bright 60 W Osram RGBW LED engine
- Collimator lens with tight 4.5° beam angle
- Ambient glow ring with 24 individually pixel-controllable RGB LEDs
- Electronic dimming and Strobe
- Temperature-controlled fan cooling
- Unlimited Pan & Tilt rotating
- 3 + 5 pin XLR DMX connection
- Neutrik TRUE 1 in and thru socket
- Compact size—L: 275 x W: 188 x H: 325 mm / L: 10.8 x W: 7.4 x H: 12.8 in
- Low weight—7.5 kg/16.5 lbs.
Specifications
-
Physical Length: 275 mm (10.8 in.) Width: 188 mm (7.4 in.) Height: 325 mm (12.8 in.) Weight: 7.5 kg (16.5 lbs.)Dynamic Effects Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout (independent in beam and ring) Beam color mixing: RGBW Pre-programmed effects: FX (effect macros) in ring with variable speed and direction of sequences, synchronization and chases across multiple fixtures Ring color mixing: RGB, grouped or individual control of 24 cells Virtual color wheel: 33 color presets, virtual color wheel rotation effects, random color (independent in beam and ring) Pan: 540° Tilt: 270° Pan and tilt speed: Adjustable via onboard control panel and DMX Dimming: 0-100%, coarse and fine control (independent in beam and ring) Pan and tilt rotation effect: Constant, variable speed and directionControl and Programming Control options: DMX, RDM, stand-alone, master/slave Setting and addressing: Control panel with backlit LCD display DMX channels: 24 or 93 Stand-alone trigger options: Music trig, auto trig DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20Optics Beam effect light source: 60 W RGBW Osram LE RTDUW S2WP Ring effect light source: 24 x 0.25 W RGB LEDs Cutoff beam angle: 4.4° Minimum LED lifetime: 20,000 hours to >70% luminous output* *Under manufacturer’s test conditions.Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20Installation Minimum clearance around fan and air vents: 100 mm (4 in.) Mounting points: Two quarter-turn omega brackets for rigging clamps Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.)Connections AC power in, thru: Neutrik TRUE1 DMX data in, thru: 3-pin and 5-pin locking XLR
-
Electrical AC power: 100-120 / 200-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch modeTypical Power and Current 120 V, 60 Hz: 0.85 A, 100 W, PF 0.99 230 V, 50 Hz: 0.49 A, 108 W, PF 0.99 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 1300 BTU/hr. (at full intensity, full white)
Değerlendirmeler
Henüz değerlendirme yapılmadı.