Martin Rush Batten 1 Hex – 7 x 10W RGBW + UV Led Boyama Çubuk
- 12-cell batten with RGBAW+UV 6-in-1 LEDs
- Full pixel control of individual LEDs
- Removable diffuser/lens that increases the beam angle from 25° to 32°
- Electronic dimming and Strobe
- Brackets are available for floor or truss mounting
- Lightweight construction (8 kg / 15 lbs.)
Specifications
-
Physical Length: 900 mm (35.4 in.) Width: 100 mm (3.9 in.) Height: 200 mm (7.9 in.) Weight: 6.8 kg (15 lbs.)Dynamic Effects Dimming: 0 – 100%, coarse & fine control Shutter: Strobe & pulse effects, instant open and blackout Color : RGBAWUV (6-in-1) color mixingControl and Programming Control systems: USITT DMX512/1990 with RDM DMX channels: 13, 80 RDM compliance: ANSI/ESTA E.120 Interface: Control panel with backlit LCD displayOptics Beam angle: 25° (without diffuser), 33° (with diffuser) Field angle: 44° (without diffuser), 63° (with diffuser)Construction Housing: Extruded aluminium, thermoplastic end caps Color: Black Protection rating: IP20Installation Mounting points: Adjustable bracket, surface or truss mount Location: Indoor location only Orientation: Any Minimum distance to combustible materials: 0.1 m (4 in.) Minimum distance to illuminated surfaces: 0.5 m (20 in.)Connections AC power input/output: Neutrik PowerCon DMX and RDM data in/out: 3-pin and 5-pin locking XLR
-
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 250 V 1.0 A Typical half-cycle RMS inrush current: 9.7 A Recommended Miniature Circuit Breaker when power linking: Type D* *Per IEC 60898/UL489/CSA C22.2 No. 5 Maximum total power consumption: 148 WTypical Power and Current 100 V, 60 Hz: 148 W, 1.6 A, PF 0.978 120 V, 60 Hz: 148 W, 1.3 A, PF 0.972 230 V, 50 Hz: 148 W, 0.78 A, PF 0.821 Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)
Değerlendirmeler
Henüz değerlendirme yapılmadı.